Product ID:CORLAR EPOXY ENAMEL,WHITE,823-8022/VG8339
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001452
MSDS Number: BCCXC

E.I. DUPONT DE NEMOURS & COMPANY,INC.

1007 MARKET STREET
WILMINGTON, DE 19899
US

Emergency Phone: 800-441-7515

Info Phone: 800-441-7515

Cage: 19898

E.I. DUPONT DE NEMOURS & CO., INC.

1635 WILMINGTON, DE 19898 US

Telephone: 800-441-7515;800-441-9442

Cage: 19898

AROMATIC PETROLEUM DISTILLATE(BY ANALOGY TO XYLENE)

Fraction By Weight: 14.0%

ACGIH TLV: 100PPM(PER MFR)

ETHER ALCOHOL

Fraction By Weight: 7.0%

ACGIH TLV: 200PPM(PER MFR)

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 20.0%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POLYAMIDE(FROM ACTIVATOR)

Fraction By Weight: 16.0%

ACGIH TLV: 100 PPM(PER MFR

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 0.03%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Effects of Overexposure:CAUSES HEADACHE,NAUSEA,IMPAIRMENT OF REACTION
TIME AND COORDINATION.

First Aid:INHALATION:MOVE TO FRESH AIR TO IMPROVE BREATHING;SKIN:WASH
WITH SOAP & WATER.REMOVE CONTAMINATED CLOTHING;EYES:FLUSH WITH
WATER FOR AT LEAST 15 MIN.CALL A PHYSICIAN.

Flash Point:80-150F(T.O.C.)
Lower Limits:1.1
Upper Limits:15.7
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:COOL CLOSED CONTNRS W/H*20 USING FOG NOZZLES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS & OPEN
FLAMES.CLOSE CONTAINERS AFTER EACH USE.DO NOT STORE ABOVE
120F;AVOID PROLONGED CONTACT W/SKIN.
Other Precautions:WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING OR
SMOKING;OBSERVE LABEL PRECAUTIONS;CONTAINERS SHOULD BE GROUNDED
WHEN POURING;USE NON-SPARKING TOOLS TO REMOVE SPILL;AVOID BREATHING
VAPORS.

Respiratory Protection:USE CARTRIDGE-TYPE RESP IAW MFR DIRCTION IF AIR
CONTMNTS UNCONTRLABL
Ventilation:LOCAL & MECH PROVIDE SUFFICIENT VENT TO KEEP BELOW TLV
LEVEL
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:USE APPROPRIATE INDUSTRIAL HYGIENE
PRACTICES.
Supplemental Safety and Health
MSDS FM MFR DATED:10/23/73;VAP PRESSURE/DENSITY NOTED OF PRINCIPAL
SOLVENT;THIS DATA DESCRIBES WHITE CORLAR EPOXY ENAMEL
823-8022/VG8339 MIXED;PER MFR,ITEM HAS BEEN DISCONTD,:SEE ADDL
DATA*

HCC:F4
Boiling Pt:B.P. Text:257-374F
Vapor Pres:10
Vapor Density:3.66
Spec Gravity:1.152
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MODERATE
Appearance and Odor:WHITE,SEMI-VISCOUS LIQUID;STRONG SOLVENT ODOR
Percent Volatiles by Volume:57.0

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, CORROSIVES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CO,CO*2,SMOKE AND OXIDES OF LEAD &
NITROGEN

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.